- DOWNLOAD KIES FOR ANDROID 4.2.2 HOW TO
- DOWNLOAD KIES FOR ANDROID 4.2.2 INSTALL
- DOWNLOAD KIES FOR ANDROID 4.2.2 DRIVERS
Galaxy Tab 2 10.1 should now be updated with P5100XXDNA1 Android 4.2.2 stock firmware. Step-11: When the installation process is completed, the tablet will restart automatically and soon a PASS message with green background will appear in the extreme left box at the very top of Odin. The installation process should begin now and take about few minutes to complete Step-10: Verify everything and click the Start button in Odin. pit file has been chosen in the previous step Step-9: In Odin enable Auto Reboot and F.Reset Time checkboxes.
Note: Ignore the last three steps (step-b, c and d) if such files do not exist. tar.md5 fileī) Click the Phone button and select file with MODEM in its nameĬ) Click the CSC button and select file with CSC in its nameĭ) Click the PIT button and select the.
DOWNLOAD KIES FOR ANDROID 4.2.2 INSTALL
Step-8: Select these files extracted from P5100XXDNA1folder to install on the tabletĪ) Click the PDA button and select the. Note: If the Added message does not appear, then try to re-install USB derivers or change the USB port on the computer. Also, the ID: COM box in Odin will turn light blue with COM port number, indicating successful connection When the phone is connected successfully an Added message will appear under Odin. Wait for some time until Odin detects the device. Step-7: Connect the Galaxy Tab to computer using USB cable while it is in Download mode. Step-6: Run Odin3 v3.07.exe as Administrator Now press the Volume Up button to enter Download Mode
Step-5: Boot the tablet into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on the screen. Step-3: Download Odin v3.07 and extract it to get Odin3 v3.07.exe with some other files tar.md5 file with few other files, which are optional Step-2: Extract the downloaded firmware zip using winrar/7zip/winzip or any other extracting tool to get a. Step-1: Download P5100XXDNA1 Android 4.2.2 Jelly Beanfor Galaxy Tab 2 10.1 to computer
DOWNLOAD KIES FOR ANDROID 4.2.2 HOW TO
How to install P5100XXDNA1 Android 4.2.2 Jelly Bean on Galaxy Tab 2 10.1 As flashing this on any other variant might brick the device, verify the model number of Galaxy tab y navigating to Settings> About tablet> Model number. Also, the custom recovery will be replaced by the stock version.ħ) The device will no longer belong to a rooted version with the installation of official firmware.Ĩ) P5100XXDNA1 Android 4.2.2 Jelly Bean firmware works only with Samsung Galaxy Tab 2 10.1 GT-P5100. Therefore, the Galaxy Tab should have charge above 80% battery charge.ĥ) The device should be factory unlocked and not locked to a particular carrier.Ħ) The tablet will lose custom ROM with the installation of official firmware. If the device is having any custom recoveries such as CWM or, TWRP then backup data using the same.Ĥ) If the Android device powers off due to lack of battery while the installation process, it could damage the device. ģ) As the tutorial is likely to wipe out all data of the tablet, create a backup.
DOWNLOAD KIES FOR ANDROID 4.2.2 DRIVERS
1) Install USB Drivers for Samsung Galaxy Tab 2 10.1 to connect the Android device with the computer.Ģ) Enable USB Debugging Mode on tablet to connect it with the computer and use Android SDK with it.